Vitek Performance delivers performance to the marine industry with the Marine and Marine Braided ignition wires. The line of high performance ignition products is designed specifically with the marine enthusiast in mind. Marine ignition wires are the highest quality inboard and I/O custom spark plug wire sets available. Marine quality spark plug wires are also available as custom fit outboard leads designed exclusively for outboard marine engines.

The Wire: The Marine spark plug wire is constructed of the highest quality components available for use in marine applications. The wires begin with a special Stainless Steel Mag Wire core designed to deliver the hottest possible spark and to eliminate disruptive Radio Frequency Interference (RFI) and Electromechanical Interference (EMI). The core is constructed with braided KevlarT, which is micro spiral wound with stainless steel and coated with ferrite-impregnated latex. The spark plug wire is then processed to apply a 100% pure silicone jacket with a layer of braided fiberglass for pull-off strengthening, and finished with another jacket of self-extinguishing 100% pure silicone jacket for the added heat protection up to 450ºF in a 8mm wire.

For added heat protection and strengthening, Vitek offers their exclusive Marine Braided ignition wire. As most people know, horsepower equals heat therefore greater horsepower produces higher engine compartment temperatures. The Marine Braided ignition wire braid has been tested to resist engine temperatures up to 1200º F. This is what makes our Marine ignition cables the very best. Normal standard silicone wires will withstand temperatures of about 450º F. Most applications will never surpass this temperature but for extreme engine environments, the braided wire is the solution. The Marine Braided ignition wires are handcrafted which produce a far superior product. Available colors are Red , Yellow, Blue, Green, Purple, White, Black, or Silver . Because of the very long life of the Marine Braided ignition wires, sometimes performance enthusiasts are interested in a new look under their engine compartment cover. Vitek Performance offers complete re-braiding on any set of Marine Braided ignition wires in any available color for only $55 ºº per set plus shipping. Simply send in your wires and Vitek Performance Products will make them look like new.

The Terminals : The Marine spark plug wire quality is continued at the ignition cable terminal. The terminals are made of 100% stainless steel as opposed to zinc plated steel or bare steel with no plating which most manufacturers use to cut costs. The use of Stainless Steel prevents premature failure of the wire set by eliminating terminal corrosion. The spark plug terminals incorporate an extra long crimp area, which increases terminal pull off strength to over 50 pounds. This is twice the strength of most ignition wires on the market. Terminal pull off is the number one cause of claimed defective wire sets. A high-grade steel snap ring is designed into the terminal, which not only ensures a positive connection but also eliminates an area of possible electronic interference generation. In addition, where a bent terminal is required, Marine uses a terminal bent to the shape of the boot rather than a straight terminal forced through a 90º degree boot as seen in many of our competitor's products. While our terminals are as much as three times the price of those used by our competitors, the contribution to a superior finished product far exceeds the investment.

The Boots : Marine spark plug wire cable boots are made of pure high-grade silicone so as to withstand the high heat and moisture conditions encountered in marine applications. The coil end boot features an extra long neck to combat moisture and preserve the crucial connection. Both in appearance and function, these boots are as good as it gets.

WARRANTY

Limited Lifetime Warranty - warranty card enclosed in wire set package gives the details on submitting a claim.