Additional Information on the Performance Sparkplug Wires

VITEK High Performance Series spark plug wires are a 8.5mm diameter wire constructed with the best components available. The wire begins with a new combination nylon/Kevlar conductor impregnated with ferrite, wound with a copper/nickel alloy metal. The nylon/Kevlar combination in the conductor increases the pull-off strength an additional 10-15 lbs. The low 25 ohm reactive core conductor is the lowest available. The jacket of the wire is a low specific gravity silicone that will withstand up to 500º F. Low specific gravity (while more expensive) increases the "tear" strength of the jacket and the insulating properties. Low specific gravity means less foreign material is mixed in the silicon. Very few, if any, ignition wire manufacturers use this material because of the cost.

The low resistance Vitek High Performance wires are also triple insulated which allows the user to run ignition upgrades as well as audio upgrades without experiencing engine noise through the stereo amplifiers and speakers. Vitek Performance Series ignition wires are rated at 25 ohms per foot. The wire comes in Bright Red with Silver Vitek insignia printed on the wire.